Gyro Breakout Board - LY530AL - 300°/s SEE_SenseCAP The anodes are all connected

The anodes are all connected together and then there are 21 cathodes to control

SPI or I2C Serial Interface

you can use it with 3V or 5V logic just fine - no level shifting required

Each APA102C LED has an integrated driver that allows you to control the color and brightness of each LED independently

Gyro Breakout Board - LY530AL - 300°/s SEE_SenseCAP The anodes are all connectedThis is a breakout board for the ST's single axis LY530ALH gyro. The LY530ALH measures angular velocity along the yaw axis with a full scale of 300 s. Two different analog outputs are provided for the z axis one 1x amplified and the other 4x amplified. A regulated voltage between 2. 7 and 3. 6VDC should be supplied to the power pins. We have the filtering circuits all set up, so you'll just need to connect the outputs to an ADC, and you're ready to