headstock bearings honda xr500 xr 500 1979 1980 Suzuki FR50 The top pin / bush

The top pin / bush / strut mounting is 14mm and the bottom is 10mm (You may need to change these to the required sizes either by using your old ones or purchasing spare bush kits from us - please see other listings)

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a VF750 for the years and models shown above

This set of steering bearings are taper roller style and have been designed to replace the original set of head stock bearings on a Kawasaki ZZR400 for the above years

This ignition coil pack is designed to replace the original ignition coil on a Honda MTX125 for the years shown above

headstock bearings honda xr500 xr 500 1979 1980 Suzuki FR50 The top pin / bushBrand new set of headstock steering bearings to fit: Honda XR 500 S (1979 1980). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda XR500 for the years and models shown above. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 27mm x 48. 5mm x 19mm. All sizes set out ID x OD x Thickness. If you require different sizes please click here to see our full list of