6" Zinc Hose Mender Outlet Threads_NPT Equivalent part number - HA25NYC76

Equivalent part number - HA25NYC76

This adapter is for personnel to hold fill lines for drop tanks

Install so that flap hangs down due to gravity

The nozzle was attached to a fifty foot 1 1/2 inch fire hose

6" Zinc Hose Mender Outlet Threads_NPT Equivalent part number - HA25NYC76The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together. The hose mender is not designed for compressible products such as air, nitrogen, or steam. Working pressure may vary with the construction of the hose, the type of clamping system that is used, and the application. A coupled length of hose should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or